Honda Pilot: Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation
Honda Pilot 2016-2022 (YF5/YF6) Service Manual / Remove, Install, Replace, Check info / Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation
Removal/Installation
1. Connector (ECT Sensor 2) - Disconnect
2. Front Bumper Center Upper Beam B - Remove
3. Hood Latch - Move
NOTE:
- Disconnect the connector at the same time.
- Do not disconnect the hood opener cable.
- Do not bend the hood opener cable.
4. Radiator Upper Mount Bracket - Remove

5. Reservoir Hose - Disconnect

- Remove the hose clamp (A).
- Disconnect the reservoir hose (B).
6. Connector (Fan Motor) - Disconnect
- Disconnect the connectors (A).

- Remove the harness clips (B).
7. A/C Condenser Fan Shroud Assembly - Remove

8. Radiator Fan Shroud Assembly - Remove

9. Fan Shroud - Disassemble

10.All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE:
- After installing all the removed parts, adjust the hood
alignment.
- For some models: After installing all the removed parts,
aim the millimeter wave radar.